Flat die wood pellet mills differ from typical pellet mills in several primary ways. They are much lower geared to increase available torque and as a result they spin more slowly. Thus they are less productive when making pellets out of hay or grain. A high quality awareness establishes Fote on the wood pellet market. For more than 30 years Fote machinery has dealt with this product and can offer a sophisticated process for the production of high-quality pellets with very good combustibility now.
Flat die pellet mills are characterized by the fact that the die through which the raw material is forced is flat like a dinner plate. It is usually turned by a set of gears called a ring and pinion gear that would ordinarily be seen in the differential rear end of an automobile. However in some cases like the one on the right, the rollers are driven and the die is stationary. It is purely opinion as to whether the driven die or the driven roller variety is best. I like the driven roller models better myself.This is the smallest of the wood pellet mills that I make, it is equipped with a 225mm die and uses both a hypoid gear to make the right angle turn, and then has a planetary gear between the main gear and the mixing chamber.
As I said, wood pellet mills are more low geared. Smaller mills will use a planetary gear arrangement either in place of the typical hypoid gears or in addition to them. Larger mills typically change out the transmission altogether and replace it with a worm gear transmission in an integrated right angle gear motor. There are other differences like thicker die, larger shaft diameter and beefier bearings but those items are unseen by the consumer and vary from one supplier to the next. Here are the ones I can supply readily, but there are others as well.
Henan Fote Machinery Co., Ltd. is the largest company specializing in the production of flat die pellet mill suppliers, flat die pellet machine, which have the best quality and the most competitive prices.sawdust dryer price: http://www.fut-china.com/p-18.html
Комментариев нет:
Отправить комментарий