How can we reduce the emission of VSI crusher?

As we all know, VSI Crusher plays a very important role in the sand production line. How to improve the production efficiency of VSI Crusher becomes the most critical part. In the practical sand making production line, VSI Crusher has to meet the basic requirement of high-performance production in order to ensure the sand production. How to improve the output of VSI crusher? Experts form Henan Hongxing Mining Machinery Co., Ltd. gives customers some advice.

The VSI crusher can also be called sand maker, which is researched, developed and manufactured with the stone impacting stone principle and technology. The VSI crusher mainly uses the impacting principle to crush the large stone into small one and even into sand. There are mainly three methods that can be used for conserving energy and reducing emission of the VSI crusher.

1. The VSI crusher adopts mobile car used lubricating grease, and after four hundred hours of work, the workers should add proper amount of lubricating oil and after two thousand hours of work, the workers should open the main axis spindle mechanism and cleanse the bearing. The workers should change new bearings after 7,200 hours of work. The upper bearing of the principal axis is the movable part and the lower bearing is the fixed part and after the installation, the workers should pull the belt conveyor to see if it is able to move flexibly.

2. The tension force of the driving triangle rubber belt should be properly adjusted in order to make sure that the load force of the triangle rubber is equal. When the VSI crusher is driven by double motors, the triangle rubber on both sides should be grouped and selected in order to try to make the length of every group is the same.

3. Regularly stop the VSI crusher and open the observation door in order to observe the abrasion condition inside the VSI crusher. The workers should pay attention to the abrasion degree of the central material feeding pipe, cone cap, the upper and lower lining board of the impeller, the surrounding baseboard and if they are abraded, they should be timely changed or repaired.

vibrating screen machine: http://www.crushing-mill.com/linear-vibrating-screen/